承担项目及成果情况 |
在研项目: [1]国家自然科学面上项目,基于颤振再生效应的圆柱筒表面微结构切削形成与控制机理,2022.1-2025.12。 [2]国家自然科学青年基金,时变因素作用下薄壁筒类工件车削振动特性与抑制方法研究,2019.1-2021.12。 [3]重点实验室开放基金,基于声信号双谱分析的刮板输送机齿轮传动状态监测与诊断,2020.1-2022.1。 代表性论著: [1]Kaibo Lu, James Gu, Hongwei Fan, Xiuquan Sun, Bing Li, Fengshou Gu*, Acoustics based monitoring and diagnositics for the progressive deterioration of helical gearboxes, Chinese Journal of Mechanical Engineering, 2021,34:82. [2]吕凯波*,娄培生,谷丰收等.基于声压信号能量峭度指标的早期切削颤振预警技术研究,振动与冲击,2021, 40(20): 50-55. [3]Xinyu Pang*, Xuanyi Xue, Wangwang Jiang, andKaibo Lu, An Investigation into Fault Diagnosis of Planetary Gearboxes Using a Bispectrum Convolutional Neural Network, IEEE/ASME Transactions on Mechatronics, 2021, 26(4):2027-2037. [4]Lu Kaibo*, Gu Fengshou, Longstaff Andrew, Li Guoyan, An investigation into tool dynamics adaptation for chatter stability enhancement in the turning of flexible workpieces, International Journal of Advanced Manufacturing Technology, 2020, 111: 3259–3271.(SCI) [5]Lu Kaibo, Wang Y, Fengshou Gu, Xinyu Pang, Andrew Ball, Dynamic modeling and chatter analysis of a spindle-workpiece-tailstock system for the turning of flexible parts, International Journal of Advanced Manufacturing Technology, 2019,104: 3007-3015.(SCI) [6]Lu Kaibo, Lian Zisheng, Gu Fengshou, Liu Hunju.Model-based chatter stability prediction and detection for theturning of a flexible workpiece. Mechanical Systems and Signal Processing, 2018, 100: 814-826.(SCI) [7]Lu Kaibo, Zhang Zhandong, et al. Dynamic optimization of multipass turning of a flexible workpiece considering the effect of cutting sequence.The International Journal of Advanced Manufacturing Technology, 2016,85(1-4):325–335.(SCI) [8]Lu Kaibo, Jing M, Zhang X, et al. An effective optimization algorithm for multipass turning of flexible workpieces. Journal of Intelligent Manufacturing, 2015, 26(4):831-840.(SCI) [9]Lu Kaibo, Jing M, Zhang X, Liu H. Optimization of sequential subdivision of depth of cut in turning operations using dynamic programming. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8): 1733-1744.(SCI) [10]吕凯波,张占东,景毅.机械结构可靠性设计与优化[M].吉林大学出版社,2016.8. |